Skip to content

What makes Trident Pumps different?

At TPI, we have utilized our “patented” drive system and pump design to create a revolutionary light weight water pump that can outperform the competition in all aspects of firefighting, flood mitigation, mine dewatering, tailings pond aeration, just to name a few!

 Comparable high volume water pumps used industry wide can  weigh up to 8,000 lbs. They utilize diesel engines because they create high torque at low rpm (they can’t spin much higher than 2,000 rpm). These models can output up to 800 Lb. Ft. of torque at low RPM (2,000), but, these engines are very heavy  and require reinforced skid frames. 

Trident pumps

 Our patented design utilizes a 110 lb. high rpm engine combined with a custom CVT system that converts the engines rpm into high torque.  

Our base engine is 150 HP
• 110 ft. lbs. torque @ 8,700 rpm
• Our CVT multiplies the engine torque variably, giving us as much as 440 ft. lbs at the impeller

  • De-couples the engine from the pump, giving the system added protection from sudden pressure spikes, water hammer and accidental valve closure, which would destroy most pumps and engines that are directly coupled

Tier 4 Compliance and Trident Pumps

Tier 4 final compliance came into full effect on January 1st 2019 and as a result, Diesel engines become more expensive, with added exhaust regen, particulate filters and DEF, which cuts output power and increases fuel consumption.
Trident pumps utilize gas powered engines; have adjustable AFR, fuel pressure regulators, adjustable turbo waste gates, all of which combine to give you the ability to tune the engine for an optimum Stoichiometric ratio.

A  brief  overview  of  Trident  Pumps.

Thanks to our patented design, Trident Pumps:
• Eliminate the destructive results of Water Hammer  by De-Coupling the pump  from  the  engine, which  also  prevents  engine  failure  from  sudden  exerted  loads
• Have the potential to decrease industry emissions involved with fluid pumping by as much as 75%
• The pump assembly is comprised of Hardened Steel Alloys, then nickel coated and hardened for durability, but can be rebuilt “infield”, which eliminates the need for 3rd party transport to manufacturer, saving the customer time and money
• Weigh 1/25th as much as its current competition
• Consume approximately 5 gph of regular pump gas, as opposed to 25 gph of Diesel for a comparable pump

The  Trident  Potential

After years of “Inhouse” design and testing, Trident Pump Inc. is now ready to launch in multiple industries!
• Military, for defence and protection at home and abroad
• Mining Industry
• Construction Industry
• Forestry
• Fire Fighting, rural and metro

Each  Community  Protection  System  Contains:

1 Trident pump mounted on OHV
• 1 portable hose deployer mounted on OHV
• Master spool containing 1.6 KM of 4” 400 psi lay-flat hose
• 10 – 1½” water thieves with quarter-turn cam lock and valve
• 20 – 120 GPM sprinklers with 240’ diameter coverage
• 2,000’ of 1½” handline and fire nozzles
• Two trailers
• Sets up in hours with a 4-person crew

Referrals 

below are a few comments